Installing It Into A 3.5" Bay

My case has a floppy drive tray. So, I had to take that out to install the BayOne XP.

In place

I just slid the Soyo BayOne XP into place and screwed it in. Here's a front shot of it mounted into the floppy bay tray.

Front Shot of the BayOne Mounted

That looks good.

Now, before you slide the BayOne into the case, I highly recommend that you first attach the cable to it. This will make it easier for you because all you have to do after this is just connect the USB cable to the USB header on your motherboard.

Connected to the motherboard

The black end of the USB cable goes into the BayOne while the two green ones go onto the motherboard USB headers. Now, we can finally slide it in. Here's a shot of the BayOne XP in my case.

It's in!

All that's left is to connect the USB cable onto the motherboard. Here's a shot of the motherboard's USB headers.

USB cable in

Now, the Soyo BayOne XP is ready to be used! Yay! Here's a shot of it in use.

Usage

There it is, with my USB flash drive and one of my CF cards slotted in. The green LED shows that power is running through the card reader. The orange LED shows that there is media that is slotted in. It will blink whenever there's activity.