Front & Sides

This is how it looks from the front.

The left side of the cooler is completely clear of any switch or port. Nothing of interest there.

Power Switch

On the right side of the cooler is the power switch. This enables you to turn the fans on or off.

This allows you to choose between using the Xcool NP6900 as a passive cooler or an active one.

Folding Design

If the cooler appears to be very small, that's because about slightly over a third of the cooler is folded under the main section.

To use the cooler, you just unfold it by flipping out the outer section...

... And then locking it in place.

Two plastic locks keep the outer section firmly locked in place until you need to fold it back in place again.