Add to Reddit
Cooler Master Praetorian (PAC-T01)
This is what the Praetorian PCA-T01 tower case looks from the front!
)
Front shot
Like the rest of the case, the front bezel is also made completely from aluminium and has an anodized brushed aluminium finish, which matches the rest of the case. This front bezel is thicker than other parts of the case though and is very sturdy.
The Praetorian sports four 5.25" bays as well as six 3.5" bays, of which only two are exposed and directly accessible from the front bezel. Below the two exposed 3.5" bays are the dual 80mm fan intakes. You can catch a glimpse of the two 80mm fans through the wire-mesh grill.
The upper left corner of the front bezel is where Cooler Master chose to engrave the name "Praetorian" name.
)
Praetorian!
The size and position of the engraving were apt, as it was not too big or too out of place to disrupt the sleek design.
Specifications
Here are the specifications of the Cooler Master Praetorian PAC-T01 Tower Chassis.
| Model |
• PAC-T01 |
| Dimensions |
• 497
mm long |
| Weight |
• 6.3 kg |
Material |
• Aluminium Alloy |
Form Factor |
• ATX |
| Power Supply Form Factor |
• PS/2 |
| Expansion Slots |
• 7 |
| Drive Bays |
• 5.25"
bays x 4 (Exposed) |
| Ventilation |
• Dual 80 mm x 25 mm
Front Fan (Included) |
| I/O Ports |
• USB 2.0 connector
x 2 |
Now, let's take a look at its different features!
<<< Packaging, Contents : Previous Page | Next Page : Front I/O Ports, The Buttons, Screws, Bezels >>>
