The OCZ Agility 2 (E) 60 GB SSD
The OCZ Agility 2 (E) 60 GB solid state drive has the official part number of OCZSSD2-2AGTE60G. The letter E in the part number designates that it is an "Extended Capacity" drive. OCZ Agility 2 Extended Capacity drives have 20% more capacity than regular Agility 2 drives.
The extra capacity comes at the expense of reserve flash memory cells. Instead of the standard 28% reserve used by the SandForce 1222 controller for write-leveling and garbage collection duties, OCZ uses a slightly different firmware that cuts down that reserve to just 7-8%, allowing them to boost the Agility 2's capacity by 20% with the same amount of flash memory.
Although both the E and non-E versions of the Agility 2 SSD costs the same, this technique effectively gives the "Extended Capacity" drive a much lower cost per GB. Both versions are still covered under the same 3 year warranty, which is great news. However, "Extended Capacity" drives will develop "bad sectors" sooner, as they have much fewer spare cells to replace the bad ones that develop over time.
This drive is designed to replace regular 2.5" hard disk drives, so it has the same form factor and looks pretty much like a hard disk drive. The only difference is it's very, very light and the case is flat on both sides. The underside has a simple label that lists the model number, capacity, and place of manufacture, amongst other things.
Usable Capacity
This OCZ Agility 2 (E) drive officially has a formatted capacity of 60 GB. We checked that out by formatting both in NTFS using Windows Vista.
The actual formatted capacity was 60,019,437,568 bytes. This is slightly (~19 MB) above than the official storage capacity. With about 96 MB allocated to the NTFS file system, the actual usable capacity was about 76 MB below 60 GB.
Let's take a look at its specifications.
Specifications
Model |
OCZSSD2-2AGTE60G |
Formatted Capacity |
60 GB |
SSD Controller |
SandForce SF-1222 |
NAND Flash Type |
Multi-Level Cell (MLC) NAND |
Cache Buffer |
NA |
Memory Channels |
Unknown |
Internal Data Transfer Rate |
285 MB/s (maximum read) |
Average Seek Time |
0.1 ms |
Input And Output Per Second (IOPS) |
Random 4K write : 10,000 (4 KB Aligned) |
Power On To Ready |
NA |
Power Consumption |
2.0 W (Read/Write) |
Interface |
Serial ATA 3.0Gb/s |
Supported SATA Data Transfer Mode |
3.0 Gbits/s |
SATA Hotplug Capability |
Yes |
NCQ Support |
Yes |
TRIM Support |
Yes |
Maximum Height |
9.3 mm |
Maximum Width |
69.63 mm |
Maximum Length |
99.8 mm |
Weight |
77 g |
Power Requirements |
5.0 V ± 5% |
Ambient Temperature |
0 °C to 70 °C
(Operating) |
Maximum Shock |
1500 G (Operating) |
Maximum Vibration |
20 G (Peak) @ 10-20 kHz in 3 axes |
Drive Acoustics |
0 dBA |
Reliability |
27 bytes of ECC per 512 bytes data |
Endurance |
Read : Unlimited |
MTBF |
2,000,000 hours |
Support Tech ARP!
If you like our work, you can help support out work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!
Page |
Topic |
|
1 |
||
2 |
||
3 |
• The Agility 2 (E) 60 GB SSD |
|
4 |
||
5 |
||
6 |
||
7 |
||
8 |
||
9 |
||
10 |
||
11 |
||
12 |
<<< OCZ Solid State Drives, Packaging : Previous Page | Next Page : The Connectors, 3.5" Drive Bay Adaptor, SSD Maintenance >>>