Buy the ARP T-Shirt! BIOS Optimization Guide Money Savers!
 

 25 October 2007
 N/A
  N/A
 Overclocking
 PsYkHoTiK
 1.0
 Discuss here !
 246100
 
   
Desktop Graphics Card Comparison Guide Rev. 33.0
Covering 628 desktop graphics cards, this comprehensive comparison allows you ... Read here
BIOS Option Of The Week - Virtualization Technology
Since 1999, we have been developing the BIOS Optimization Guide, affectionately known... Read here
   
Buy The BOG Book Subscribe To The BOG! Latest Money Savers!
The Intel Core 2 Duo E6850 Overclocking Report
Digg! Reddit!Add to Reddit | Bookmark this article:

Scott "PsYkHoTiK" Suleiman's
Intel Core 2 Duo E6850
Overclocking Report

Page 1

About Scott
How Do I Overclock?
My Overclocking Goals

Page 2

Hardware Used
Software Used

Page 3

Git 'R' Done!

Page 4

Comments On Myself
Comments On The Others

Page 5

Comments On The Hardware
PsYkHoTiK's Conclusion

 

Git 'R' Done!

I started the process just like any other overclocking I've done in the past. I started up by overclocking the processor in small steps with the processor at stock voltage. That worked out fine well above 3.6 GHz. I then chose to burn in the processor for a while at this setting, just so I could get a solid base for further overclocking.

Then I bumped the voltage up by 0.1 V and proceeded to push onwards. The next stop for me would be at 3.9 GHz at the relatively-lovely voltage of 1.45 V. This is the actual voltage. The ASUS P5K Premium undervolts just a tad (~ 0.01 V) but there is NO vdroop whatsoever. This setting passed through 12 hours of continous stress testing.


3.9 GHz!

7 hours Orthos stable

Do note that this was still done at the time when I was still running Orthos. Next, I would try to to hit the big 4.0 GHz! To get to 4 GHz , the processor needed a bump in vcore and that was all it took to hit the big 4.0!

I actually had this Orthos stable on the processor running at 4.0 GHz for about 12 hours. However, it was around this time that Chai pointed out the small flaw in Orthos - it only ran 8k FFT on the 'stock' Small FFT test whereas Prime95 would change the length every 15 minutes. Adamant that it made no real difference, I downloaded Prime95 v25.3 (which support dual-core processors) and fired up the Small FFT test (test# 1). Crushingly, it failed after a mere 2 minutes. All I can say is fudge.....


4.0 GHz!

28 hours stable at 3.95 GHz

After revising my methods interspersed with pleadings and exhortations to the CPU (I know some of you do it as well - come on already!), we finally "agreed" to settle for 3.95 GHz. I tried to hit 4.0 GHz again after this but no matter how much more voltage I gave it, the processor just would't be stable in Prime95 at 4.0 GHz.

It must be noted that one of my OCZ Reaper PC2-8000 HTC memory modules died not long after I started on this project and I had to rely on cheaper memory modules while I send the Reapers in for RMA. Could this be a contributing factor? I will retry once my Reapers get back.



<<< Hardware Used, Software Used : Previous Page   |   Next Page : Comments On Myself, Comments On The Others >>>

 

 
   
The Solid State Drive Optimization Guide Rev. 2.1
The NVIDIA CUDA 4.0 Tech Report
The 3 TB Hard Disk Drive Installation Guide Rev. 1.1
Sony A810 Walkman Video MP3 Player
Let's Make Your DVD Go Loop-Loop-Loop
Thermalright SI-120 CPU Cooler Review
OCZ 1GB Mini-Kart USB Flash Drive Review
ASUS AX800Pro X800 Pro Graphics Card Review
Far Cry Review
NVIDIA GeForce FX Go5200 GPU Review

 


Copyright © Tech ARP.com. All rights reserved.