The Box
The Musketeer 2 comes in a very nice shrink-wrapped retail box. Here is a picture of the box's top.
As you can see, the Musketeer 2 has a model number of LLC-U03. You can also see a selection of the LED colours that the Musketeer 2 supports.
And this shot of the box's bottom shows its features :-
- Direct connection with the 12V DC Power socket of your PC
- Requires only one 5.25” drive bay
- No software required
- Easy to install
- Both Right/Left sound meters are designed with adjustment function to cater to your needs for sound effects
- HDD Meter indicates the speed hard disk is processing
- Reflective LED display with seven colors, including red, blue, green, yellow, light blue, purple, white and flashing colors
The colour of the Musketeer 2 is also printed at the bottom of the box. So, if you are buying the Musketeer 2, be sure to check the colour here!
Contents
Open the box up and this is what you should see.
The Musketeer 2 is well-padded with foam support and there appears to be quite a lot of stuff in there!
And yes, the Musketeer 2 comes with more than just the front panel display. Check out the contents of the Musketeer 2 package :-
Here is a list of the components I found in the Musketeer 2 package :-
- One Musketeer 2 multi-function display
- One 3.5" drive bay cover with LED switch and cable (80cm)
- One PCI bracket with two cables (80cm)
- One PCI bracket with LED switch and cable (80cm)
- One HDD LED cable (80cm)
- One Extended HDD LED Out connecting cable (50cm)
- One audio cable with dual 3.5mm stereo plugs (20cm)
- One Musketeer 2 manual
- One Screw pack
Let's take a close look at them!
<<< Introduction, The Musketeer 2 & Specifications : Previous Page | Next Page : The Display Panel >>>