The Connectors
This is a Serial ATA drive, with native support for SATA 3.0 Gb/s. It is backward-compatible so you will have no problem using it with older SATA 1.5 Gb/s controllers. However, the faster SATA 3.0 Gb/s interface is necessary for optimal performance since Super Talent FTM28GX25H has a large 64 MB cache and boasts a sustained internal (NAND-to-buffer) read transfer rate of 260 MB/s.
Like all Serial ATA drives, it comes the standard SATA data (left) and power (right) connectors and is hot-pluggable. That means you can connect and disconnect this solid state drive to your PC while it's still running. There is no jumper block because there's really nothing for you to set.
Breather Hole
Unlike hard disk drives, the Super Talent UltraDrive GX has no breather holes. That's because it is not a mechanical drive with spinning platters that require a filtered hole to equalize its internal pressure and allow condensation to escape. A solid state drive is basically made up of nothing more than a circuit board with a controller and NAND flash memory chips. Same stuff you will find in a USB flash drive.
Defragging The UltraDrive GX
Unlike hard disk drives, flash-based SSDs write and overwrite data in large blocks of 512 KB to 1 MB in size. Even if you only need to overwrite one byte of data, it has to erase and overwrite an entire block. This causes a lot of wear on the memory cells and greatly reduces their lifespan. To prevent that from happening, SSDs perform wear leveling by spreading the writes so that the flash memory cells have equal wear.
Newer SSDs, like the Super Talent UltraDrive GX, also use a large write buffer to temporarily store and combine writes before they are actually written to the flash memory. This reduces the number of block erases and wear on the memory cells. The Super Talent UltraDrive GX comes with a large 64 MB DRAM cache for this very purpose.
Both wear leveling and write combining will eventually cause performance to degrade because of internal fragmentation. Unfortunately, this kind of fragmentation cannot be corrected by traditional disk defragmentation software. To solve this performance issue, you have to use a special SSD defragmentation software. Super Talent calls theirs, the Performance Refresh Tool, which you can download from their website.
Support Tech ARP!
If you like our work, you can help support out work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!
<<< The Super Talent FTM28GX25H, Usable Capacity, Specifications : Previous Page | Next Page : Testing The UltraDrive GX >>>