Testing The 6 TB Western Digital Red

The Testbed

Testing Methodology

We tested in both Windows 7 and Windows Vista, with the latest updates. We chose to use IO Meter 2008 as well as our "old faithful", WinBench 99 2.0, with the following tests :

• Platter Data Transfer Profile
• Business Disk WinMark 99
• High-End Disk WinMark 99
• Disk Transfer Rate (Beginning)
• Disk Transfer Rate (End)

Business Disk WinMark 99 is a real-world simulation based on three office application suites - Microsoft Office 97, Lotus SmartSuite and Corel WordPerfect Suite 8, as well as a web browser, Netscape Navigator. They are quite dated, but should still reflect the usage patterns of users in an office environment using such applications. The test runs through a script that keeps multiple applications open, while it performs tasks that switches between those applications and Netscape Navigator. The result is the average transfer rate during the script run.

High-End Disk WinMark 99 is a real-world simulation based on AVS/Express 3.4, FrontPage 98, MicroStation SE, Photoshop 4.0, Premiere 4.2, Sound Forge 4.0 and Visual C++ 5.0. However, it differs by running the applications serially, instead of simultaneously. There are individual results for each application but in this comparison, we will be looking only at the weighted average score, which is the average transfer rate during the tests.

Unfortunately, WinBench 99 is not fully compatible with Microsoft Windows 7, registering a SetFilePointer error in the Disk Access Time test. So, we were not able to obtain any Disk Access Time results.

In addition, it would keep crashing if the hard drive was tested with a single partition. This is likely due to a limit on the size of the partition that is supported by WinBench 99. We came up with a workaround by dividing the hard disk drive into 5 partitions of equal sizes. We then tested each partition individually and averaged the results.

Usable Capacity

The 6 TB Western Digital Red hard disk drive has an official formatted capacity of 6,001,805 MB. We checked that out by formatting it in NTFS using Microsoft Windows 7.

The actual formatted capacity was 6,001,173,458,944 bytes, which is slightly (632 MB) lower than the official storage capacity. With about 277 MB allocated to the NTFS file system, the actual usable capacity remained slightly above 6 TB.

Maximum Surface Temperature

We monitored the surface temperature of seven hard disk drives during their benchmarks. The following chart shows their operating temperature range, from idle to maximum load. Please note that instead of giving you the absolute numbers, we are showing the temperature delta, which is the difference between the actual temperature and the ambient room temperature.

Not surprisingly, the 6 TB Western Digital Red was a very hot drive at full load, where it was actually 9.3°C hotter than the 4 TB Western Digital Red (WD40EFRX) and 9.8°C hotter than the 3 TB Red (WD30EFRX).

The good news is Western Digital tuned it to run a lot cooler when it idles. Its maximum recorded temperature dropped a whopping 12.2°C when it idled. It even ended up running slightly cooler than the 3 TB Red drive.

Western Digital is obviously aware that their NAS drives will run a little hot, more so in the restricted confines of a NAS enclosure. They have thus rated them for a higher maximum operating ambient temperature of 65°C, up from the 60°C of their desktop drives.

Support Tech ARP!

If you like our work, you can help support out work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!