Add to Reddit
The Module
The Mushkin 1GB HP3200 module is a double-sided module with 16 DDR SDRAM chips.
)
Front
It uses blue-anodised heatspreaders with the name "Mushkin" embossed on them.
)
Emboss
The heatspreaders are held firmly with two metal clips, which almost prevents the removal of the heatspreader. The label on the module clearly states the model name - "1GB HP PC3200 DDR 2-3-2".
)
Pair
Please note that because this is not a high-end module, it doesn't use the Jet Black 6 Layer PCB, contrary to what was stated on the Mushkin website. It is probably an honest mistake which we hope will be corrected soon.
)
Label
The back of the module is 100% identical to the front, just without the label.
)
Back
The heatspreader is perfectly stuck onto every single memory chip using thermal tape.
)
A look at the heatspreader-chip interface
Module Specifications
| Module Capacity | 1024 MB
|
| DIMM interface | 184 pins
|
| SDRAM Speed Grade | DDR400 |
| Rated Memory Clock | 200 MHz |
| Data Transfers Per Clock | 2 |
| Supported CAS Latencies | 2.0, 2.5,
3.0 |
| Refresh Rate | 7.8
µs |
| I/O Voltage | 2.6
- 2.7 V |
| Operating Temperature | 0
to 70 °C |
| Power Dissipation | NA |
