PCIE Spread Spectrum
Common Options : Down Spread, Disabled
Quick Review
Spread spectrum clocking works by continuously modulating the clock signal around a particular frequency. This "spreads out" the power output and "flattens" the spikes of signal waveform, keeping them below the FCC limit.
This BIOS feature controls spread spectrum clocking of the PCI Express interconnect.
When set to Down Spread, the motherboard modulates the PCI Express interconnect's clock signal downwards by a small amount. Because the clock signal is modulated downwards, there is a slight reduction in performance. The amount of modulation is not revealed and depends on what the manufacturer has qualified for the motherboard. However, the greater the modulation, the greater the reduction of EMI and performance.
When set to Disabled, the motherboard disables any modulation of the PCI Express interconnect's clock signal.
Generally, frequency modulation via this feature should not cause any problems. Since the motherboard only modulates the signal downwards, system stability is not compromised. However, spread spectrum clocking can interfere with the operation of timing-critical devices like clock-sensitive SCSI devices. If you are using such devices on the PCI Express interconnect, you must disable this feature.
System stability may also be compromised if you are overclocking the PCI Express interconnect. Therefore, it is recommended that you disable this feature if you are overclocking the PCI Express interconnect. Of course, if EMI reduction is still important to you, enable this feature by all means, but you may have to reduce the PCI Express interconnect frequency a little to provide a margin of safety.
If you are not overclocking the PCI Express interconnect, the decision to enable or disable this feature is really up to you. If you have electronic devices nearby that are affected by the EMI generated by your motherboard, or have sensitive data that must be safeguarded from electronic eavesdropping, enable this feature. Otherwise, disable it to remove even the slightest possibility of stability issues.
Click here to find out how you can do that now!
Links: Discuss BIOS options here in our forums | Back to the list of BIOS options