AGP Driving Control

Common Options : Auto, Manual

Quick Review

This BIOS feature allows you to set whether the AGP controller should dynamically adjust the AGP driving strength or allow manual configuration by the BIOS.

Normally it is recommended that you set this feature to Auto. The AGP drive strength values will be provided by the auto-compensation circuitry. However, manual configuration of the AGP drive strength may be necessary to get certain AGP 4X/8X cards to work properly.

To correct such compatibility problems, you should set the AGP Drive Strength to Manual. This allows you to manually set a higher AGP Drive Strength value via the AGP Driving Value function.

Please note that this feature is a little different from AGP 4X Drive Strength because it usually comes with a single drive strength control. The AGP 4X Drive Strength feature comes with two to four drive strength controls.

Support Tech ARP!

If you like our work, you can help support out work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!