The Module
The module is covered with two gold-plated copper heatspreaders which is certainly eye-catching. You will want to only hold the module by the sides because fingerprints show up very easily on the burnished surface.
The white label confirms that this is truly the OCZ PC3500 Gold Gamer eXtreme Edition module with a capacity of 512MB and rated timings of 2-2-2-5.
The front heatspreader also sports an embossed logo, which really matches the mirror finish of the platinum-plated heatspreader. They make the module look classy, without going overboard.
In the back, there's nothing, except for the embossed OCZ logo.
Peeking under the heatspreaders, we noticed nothing out of the ordinary. The memory chips were all properly taped to the heatspreaders.
Of course, the heatspreaders are not merely held in place by thermal tape. Two stainless steel clips keep the heatspreaders firmly attached.
It's difficult to remove the heatspreaders and you risk damaging the module. Please note that removing the heatspreader automatically voids the module's lifetime warranty. So, don't attempt it unless you absolutely MUST peek at the memory chips.
Module Specifications
These are the specification for the OCZ PC3500 Gold Gamer eXtreme Edition module.
Module
Capacity |
512 MB |
Configuration |
64M x 4
banks x 16 bits |
Speed
Grade |
PC3500 |
Actual
Memory Clock |
216.7
MHz |
Data
Transfers Per Clock |
2 |
Maximum
Transfer Rate |
3.5 GB/s |
Timings |
2 - 2
- 2 - 5 |
Average
Refresh Rate |
15.6 µs |
I/O Voltage |
2.8 V
- 3.1 V |
<<< Packaging, Contents : Previous Page | Next Page : The Memory Chip, Memory Chip Specifications >>>