Master Drive UltraDMA
Common Options : Auto, Disabled
Quick Review
This BIOS feature allows you to enable or disable DMA (Direct Memory Access) support (if available) for the Master IDE device attached to that particular IDE channel.
Setting this BIOS feature to Auto lets the BIOS auto-detect the IDE drive's maximum supported DMA mode at boot-up.
Setting this BIOS feature to Disabled forces the BIOS to disable DMA transfers for the IDE drive.
Normally, you should leave it as Auto and let the BIOS auto-detect the drive's DMA support. If the drive supports DMA transfers, the proper DMA transfer mode will be enabled for that drive, allowing it to burst data at anywhere from 33MB/s to 133MB/s (depending on the transfer mode supported).
You should only disable it for troubleshooting purposes. For example, certain IDE devices may not run properly using DMA transfers when the PCI bus is overclocked. Disabling DMA support will force the drive to use the slower PIO transfer mode. This may allow the drive to work properly with the higher PCI bus speed.
If you like this article, please share it! -> |
Support Tech ARP!
If you like our work, you can help support out work by visiting our sponsors, participate in the Tech ARP Forums, or even donate to our fund. Any help you can render is greatly appreciated!
Support us by buying from Amazon.com! |
|
&&adcode&& | |
Grab a FREE 30-day trial of Amazon Prime for free shipping, instant access to 40,000 movies and TV episodes and the Kindle Owners' Lending Library! |
Click here to find out how you can do that now!
Links: Discuss BIOS options here in our forums | Back to the list of BIOS options