AGP 4X Drive Strength
Common Options : Auto, Manual
Quick Review
This BIOS feature allows you to set whether the AGP controller should dynamically adjust the AGP driving strength or allow manual configuration by the BIOS.
Normally it is recommended that you set this feature to Auto. The AGP drive strength values will be provided by the auto-compensation circuitry. However, manual configuration of the AGP drive strength may be necessary to get certain AGP 4X cards to work properly.
To correct such compatibility problems, you should set the AGP 4X Drive Strength to Manual. This allows you to manually set a higher AGP Drive Strength value via the AGP Drive Strength P Ctrl and AGP Drive Strength N Ctrl options.
Please note that this feature is a little different from AGP Driving Control because it usually comes with two to four different drive strength controls. The AGP Driving Control feature only comes with a single drive strength control.
Click here to find out how you can do that now!
Links: Discuss BIOS options here in our forums | Back to the list of BIOS options